Learn key details:
General remote learning buttons on the remote control to the upper part of the & ldquo; TV keypress & rdquo; operating area, i.e. wireframe within the region, the learn button can be the TV remote control of any key to learn on your set-top box remote and users to use the four key recommendation is a TV & ldquo; Power & rdquo;, & ldquo; TV/AV”, & ldquo; volume +”, & ldquo; volume & mdash; & rdquo;. TV/AV key for different models of the TV remote control logo are different, such as the logo AV, INPUT1 23, etc.. When the set-top box remote controller learns the four TV remote control keys, the user can watch and listen to the digital TV programs and services, and no longer need to use the TV remote control device.
Learn key usage
1 press and hold to learn to set the key to press the remote control “ TV button ” area of learning keys (such as: volume, power switch, etc.) red light long light.
2 immediately after the TV remote control of the corresponding button on the remote control transmitter (located in the middle of the remote control center of the white tube) red lights off, said it had received the signal this button has been learning.
3 continue to press the first step of the operation to learn the rest of the button.
Learn key usage two
Hold down the learning setting key (about three to five seconds) and the red indicator light is long.
Then press the remote control “ TV button ” area to learn the keys (such as: volume, power switch, etc.) red indicator light flashes.
Followed by the TV remote control corresponding to the key alignment set-top box launch tube (located in the set-top box remote control device to the top in the middle of the white tube) press the button at the set-top box remote red indicator light flashes three times, said it had received the signal function keys have been learning.
Continue to press the start of the second step of the operation after learning the rest of the button and then click on learning to set the red light can be used to normal.
Remote control learning method: (only for learning type remote control)
1, switch to the TV mode, press and hold the & ldquo; learn Keys & rdquo;, indicating lamp is composed of a micro light to highlight later let go (in the form of PC press the button for the no response) when the indicator has always been very bright;
2, according to your need to learn the key indicating lamp flashing, the remote controller to learn in front of the launch of the remote controller pipe at intervals of not more than 2cm hold to learning remote control buttons on until the remote controller of the indicator light flash three show that success in learning;
3, after learning the other key press “ learn key ” exit learning form;
4, test whether the work of remote control.
If not, please repeat the process 1-3.
